![]() If you’re looking for quality plugs or any other electrical components, choose Switch Electrical Supplies. Step 6: Replace the cover and tighten the screw. Step 5: Tighten the screws to clamp the wires in place. Looking from the top, the blue wire goes on the left (the pin marked with a blue dot or the letter “N”), and the brown goes on the right (The pin marked with a brown dot or the letter “L”). The green/yellow wire links to the Earth terminal in the middle at the top. Step 4: Insert the wires, matching the colours to the correct pins. ![]() Power connects to the front, and the exposed electrodes are on the. Step 3: Loosen the screw-in or clamp terminals (depending on the plug design) using the flat-head screwdriver. Before wiring up the socket, you should take a minute to understand its circuit diagram. Step 2: Unscrew the plug cover using the Phillips screwdriver. It is vital that you use plugs and receptacles that are intended to be used together, or you could create big problems. Step 1: Strip the wires – take off about half a centimetre of the plastic insulation off the end of the wires using the wire strippers. Next, follow these simple steps to wire a South African three-pin plug: Once you have cut the cables to the right length, and removed the insulation, twist the end of each.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |